Project E30 / Ep. 19 / In-Car Rear Subframe Bushing Replacement

In this video we take a stab at replacing the bushings in the rear subframe with it still in the car. We'll also try to increase the rear ride height a tad.

/Where the bushing tool idea came from: https://www.bimmerforums.com/forum/sh...

TOOLS USED:

/M14 threaded rod: https://www.grainger.com/product/FABO...
/M14 nuts: https://www.grainger.com/product/METR...
/Pitman arm puller: https://www.harborfreight.com/tie-rod...
/2 jaw puller: https://www.harborfreight.com/3-piece...
/Tungsten carbide Dremel bit: https://www.homedepot.com/p/Dremel-1-...

PARTS USED:

/Subframe bushings: https://www.ecstuning.com/b-febi-part...
/Subframe bolts: https://www.ecstuning.com/b-genuine-b...
/Subframe nuts: https://www.ecstuning.com/b-genuine-b...
/Rear spring pads: https://www.condorspeedshop.com/produ...