MOVIDRIVE® B Training Session 7 - Troubleshooting

The seventh and last session of this training course goes over the ten common faults that we get support questions about with the MOVIDRIVE® and motor driven applications. These faults are F01, F03, F08, F14, F28, F31, F42, F44, F93, and F95. We will mention common causes for these and what diagnostic measures can be used to help find the root cause of the fault. In this session, we also review the settings of the Scope tool that will be essential to use when diagnosing faults. We conclude this session by discussing the settings for the Scope DataLogger tool, which can automatically upload the Scope recordings to the computer when you are not near the application.

During this troubleshooting session, several previous videos from this training series are mentioned to review for further instruction and demonstration. Here are links to those videos.

Session 2 - MOVIDRIVE® terminal locations -    • MOVIDRIVE® B Training Session 2 - Pro...  
Session 4 - Inspecting the motor nameplate -    • MOVIDRIVE® B Training Session 4 - Mot...  
Session 5 – Brake, motor, and encoder electrical troubleshooting -    • MOVIDRIVE® B Training Session 5 - Ele...  
Lab 2 - Fault memory introduction -    • MOVIDRIVE® B Training Session 6 - Lab...  
Lab 7 Part 2 - MOVITOOLS® Scope introduction & tuning -    • MOVIDRIVE® B Training Session 6 - Lab...  
Lab 8 - MOVITOOLS® Scope with CFC mode & tuning -    • MOVIDRIVE® B  Session 6 - Lab 8 - CFC...  
Lab 10 - Using the DBG60 keypad -    • MOVIDRIVE® B Training Session 6 - Lab...  

Video Chapters:

00:00 - General Diagnostic Guidelines
10:28 - F01 & F03 Fault
16:09 - F08 & F42 Fault
20:58 - F14 Fault
23:53 - F28 Fault
25:29 - F31 Fault
27:25 - F44 Fault
29:55 - F93 & F95 Fault
32:32 - Scope Settings
40:41 - Scope DataLogger Settings
49:09 - USA Technical Support
50:15 - Worldwide Technical Support
51:13 - Concluding Comments