Subaru Legacy Outback - RADIO REMOVAL / REPLACEMENT (2003 - 2009)

Step-by-step guide on how to remove / replace / upgrade factory radio unit on Subaru Legacy or Outback crossover ( 2003 | 2004 | 2005 | 2006 | 2007 | 2008 | 2009 | 2.5I | PZEV | 3.0 R).

Give me your support and join the channel:
   / @quitealright  

To remove the radio unit, first you will have to remove the middle console. Then plastic trim pieces around the shifter and then you will be able to access screws that are holding the radio in place. There will be 4 screws on each side. Once removed pull out the radio partially, and remove 4 screws holding the climate controls in place. Remove the radio cover, separate climate controls and pull out the radio.
Definitely not the easiest diy project, but doable.

Thanks for watching.
Don't forget to Like the video / SUBSCRIBE to the channel!

⚠ DISCLAIMER:
While QuiteAlright strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. The videos are intended for information only. Follow the manufactures repair procedure and use appropriate safety procedures. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. QuiteAlright is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.