Parduc® P40 profiler: Adjusting the holder alignment ENG

Описание к видео Parduc® P40 profiler: Adjusting the holder alignment ENG

@parduc_sharpeners
This skate sharpener and profiler P40 video include:
6.2.0 Parduc P40: Adjusting the skate holder allignment
6.2.1 If the groove is not centered on both ends of the runner, the skate holder must be re-alligned
6.2.2 Re-attach the skate holder from the machine
6.2.3 Rotate the allignment set screw using 2mm allen key. Rotate the screw using extremely small steps
6.2.4 Adjust only one side at a time
6.2.5 Install the skate holder back to the skate sharpener
6.2.6 Perform test sharpening. Adjust the alignment again, if needed

www.parduc.com

Комментарии

Информация по комментариям в разработке

Похожие видео