Как демонтировать и собрать насосы Grundfos SE1 и SEV с датчиком

See how a Grundfos service specialist repair ceramic coating on Grundfos NB, NK or TP pump and find out what the job requires and how it is performed.

The different sections include:
00:00 Introduction

Dismantling:
00:13 Removing the cable
00:35 Removing the pump housing
01:07 Drainage of oil
01:57 Removing the impeller
02:30 Removing the shaft seal
04:34 Removing shaft with rotor and bearings
06:27 Removing the stator housing
09:54 Removing the moisture switch and WIO sensor

Assembly:
10:06 Fitting the moisture switch and WIO sensor
13:39 Fitting the stator housing
17:29 Fitting the shaft with rotor and bearings
19:05 Fitting the shaft seal
20:57 Filling of oil
21:35 Fitting the impeller
22:16 Mounting the pump housing
23:20 Fitting the cable

Learn more about SE, spare parts, service kits and additional services and solutions
provided by Grundfos on https://product-selection.grundfos.co... and do not hesitate to contact us via http://www.grundfos.com/pleasecallus.

DISCLAIMER
This service video provides “how to” guidance for Grundfos products and is aimed only at skilled, trained personnel.

N.B. Any stricter local health and safety regulations and requirements take precedence over this guidance.
The video and any information in it is provided on an “as is” basis and without any liability and/or warranty to the extent permitted by applicable law.

Grundfos reviews and updates the information provided on a regular basis. However, instructions may have changed since publication of this video and therefore please always check the latest Service Instructions and the Installation & Operating Instructions of the related product.

These documents can be found on https://product-selection.grundfos.co...

#pumpservice #pumprepair #grundfospumps #grundfosservice