RO-SPIDER Multitool from Robbe Modellsport - How to build and use

In this video I will show you how to build and use the RO-SPIDER Multitool from Robbe Modellsport. The Ro-SPIDER is a combination of a model stand and a center of gravity tool. The different supports and fixtures offer a wide variety of settings. You can use it for almost any geometry or type of RC plane from small size to large size (up to approx. 4.5m wingspan). The CG tool is supporting the plane under the wings with 2 rockers that are mounted with ball bearings. The desired CG position can be set by moving the arms on the aluminum tubes. You can easily read the CG distance on the attached ruler.

Chapters:
00:00 Intro and unboxing
01:00 Building the RO-SPIDER
20:19 The different functions of the tool
21:31 Model stand functionality
24:26 Center of gravity tool
26:54 Summary

Link to the RO-SPIDER Multitool on the manufacturers website: https://www.robbe.com/en/detail/7aaad...

Specs:
Stowage dimensions approx. 360 x 260 x 160mm

Some of my other material or tools used for the build:
PVA wood glue: Ponal Express: https://www.ponal.de/produkte/wei%C3%...
Wood primer: CLOU G1 Schnellschleif-Grundierung: https://www.clou-shop.eu/clou-heimwer...
Clamps: Wolfcraft EHZ Miniature One-Hand Clamps: https://www.wolfcraft.com/products/wo...
Spring clamps: Wolfcraft PRO Spring Clamp: https://www.wolfcraft.com/products/wo...
Mini Spring Clamps: Wolfcraft Microfix Mini Spring Clamp: https://www.wolfcraft.com/products/wo...
Sanding block: Permagrit Sanding Block: https://www.permagrit.com/sanding-blo...

Camera:
Sony HDR-CX730

Microphone:
Rode NTUSB