EP. 6 My BMW E30 Restoration - Complete Removal and Preparation

Hi and welcome to my channel,
In this video I will be removing the underseal from my e30 touring.
Apologies in advance as there are quite a few clips missing at the start of the video, however everything is covered and time coded!
This took me around 3 months to complete, however I would only work on the car for around 2 hours in the evening due to the excessive noise.
I used just the one saw blade for the multitool which i sharpened regularly, and the multi tool held up for the whole task.
I also used around 6 wire wheels on the grinder, it had a bearing change before i started the task as it was on the way out!

Time Codes:
0:00 - Intro
0:43 - Roll-Over Jig
1:07 - Tools to be used
1:29 - Front Wheel Wells
2:17 - Primer to be used
3:07 - Front Floor section
5:04 - Rust Convertor Application
6:16 - Rear Floor section
7:27 - Weld 2 Primer
7:42 - Rear Floor painting
8:41 - Rear Wheel Wells
12:29 - Real-time speed of multitool
13:02 - Boot Floor section
16:05 - Outro


Products used include:
Wickes Multitool: https://www.wickes.co.uk/Wickes-Corde...
Saw blade kit: https://www.ebay.co.uk/itm/223199254229
Drill wirebrush kit: https://www.ebay.co.uk/itm/313850847555
Grinder wire wheel pack:https://www.ebay.co.uk/itm/400949687554
DINITROL Converust RC 800: https://www.ebay.co.uk/itm/233363463170
MIPA EP-Grundierfiller EPOXY PRIMER 2k: https://www.ebay.co.uk/itm/174306755267
U-Pol Weld 2 Primer: https://www.ebay.co.uk/itm/173696031285