How to Replace Reverse Light Bulb - Hyundai Elantra(2017-2018)

Bulb Type: 921

Purchase the bulbs for your vehicle here. https://auxito.com/?ref=VirarAutomotive
Use the promo code for a 12% Discount. 'VIRARAUTO'

Bulb Replacement guide: https://www.sylvania-automotive.com/b...
Bulb Type Cross Reference Guide: https://www.vleds.com/cross-reference...

Noticed that your Reverse light isn't working? This video will teach how to replace it in less than 5 minutes.

Make your vehicle visible again at night. Most of the accidents at night happen due to the vehicles not being visible. Replacing your reverse light bulb is the quickest way to mitigate that problem. You don't need any special tools (and your car already comes with one). It will cost you a fraction of time, cost of what it would to get it fixed at a repair shop.

Tools Needed: Flathead Screwdriver, Philips Screwdriver
Parts Needed: Reverse Light Bulb. 921 Bulb Type.

Instructions:
1. Open the driver side door.
2. Release the trunk.
3. Lift the trunk carpet.
4. Pull out the Flathead screwdriver.
5. Take off the 8 clips on the trunk cover.
6. Pry open the handle cover using the Flathead screwdriver.
7. Unscrew the 2 screws using the Philips screwdriver.
8. Take off the trunk cover.
9. Unplug the electrical connector by pressing it on the bottom and pulling it out.
10. Unscrew the 3 nuts using the 10 mm wrench.
11. Pull out the taillight
10. Unscrew the grey bulb holder by twisting it left.
12. Pull the bulb right out.
13. Reinsert the replacement bulb by pushing it in the bulb holder
13. Put the bulb holder back in place and twist it right to secure it in position.
14. Now put the tail-light back in position.
15. Screw the 3 nuts back using the 10 mm wrench.
16. Connect the electrical connector. Push it in and it should click in position.
17. Pull out the middle part of the clips before inserting them back in.
18. Put the trunk cover back in position and use 2 clips and put them on first in the 2 bottom holes.
19. Now get the rest of the 6 clips and re-insert them.
20. Screw the Philips screws back.
21. Push the handle cover back in place.

Watch more EASY TIPS for your 2017 / 2018 Hyundai Elantra:    • Hyundai Elantra (2017-2018) - The Ess...  

If you want your next car buying experience to be stress-free than check out https://www.virar.ca . However buying the vehicle is just the first step of the car ownership journey. This channel is to make the next step of day-to-day car ownership enjoyable and empowering.

***************************************************************************************************
DISCLAIMER:
Due to factors beyond the control of Virar Automotive, we cannot guarantee against improper use or unauthorized modifications of this information. Virar Automotive assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Virar Automotive recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Virar Automotive, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not of Virar Automotive.

#VirarAutomotive
#reverselightbulb
#hyundaielantra