M&W 1800 aka Krone 180 round Baler dry test operation NOT for kids

This #M&WBaler at #weaverstonehousefarm needed new chain bearings

If this video helped you please subscribe so we can get to 1000 subscribers so we can get paid to make more videos for you!

35mm x 72mm x 17mm is the size and can be found on Amazon for like $33 for a 10 pack. You will need the 35mm external snap rings as well they come from a different supplier on Amazon. You also need two 35mm ID washers on each side of the bearings. Must be less than 72mm OD. We also heated and hammered the rusted tight PTO shaft apart. Big thanks to Jerry for that help. Also used steel splitting wedges and a bunch of sledgehammer work to bend the back half straight again, off the guides, so it would properly close. They don’t make the bands/scraper anymore so we cut and bent old NH parts to fit. They fit pretty good. A lot of Lucas chain lube as well.