2011-2014 5.0L Coyote Mustang: How To Remove Transmission, Clutch, & Flywheel

In this video, Landan explains the procedure of how to remove an MT82 manual transmission, clutch, flywheel, and other related components from a Ford Mustang GT with a 5.0L Coyote engine.

Product Links
11-14 Mustang Transmission Parts: https://lmr.com/products/10-14-Mustan...

Watch
How To Replace 5.0L Coyote Rear Main Seal:    • How To Replace 5.0L Coyote Rear Main ...  
How to Install Transmission, Clutch, Flywheel, & Slave Cylinder:    • 2011-2014 5.0L Coyote Mustang: How To...  

Tool List
Jacks & Jack Stands or a Lift
Transmission Jack
Paint Pen
Shop or Microfiber Towels
Brake Clean
Penetrating Catalyst or WD-40
1/2" Socket Set
3/8" Socket Set
3/8" Extensions
Wobble Adapters
T-30 Torx Bit or Socket
8mm Hex Socket
Long-reach Panel Removal Tool
Combination Wrench Set
Pick Set
Prybar Set
7/8" O2 Sensor Tool (optional)
3/8" Wobble Socket Set (optional)

Chapters
00:00 - Intro & video explanation.
01:36 - Safely support the vehicle.
01:44 - Remove the strut tower brace & engine cover.
01:54 - Disconnect the negative battery cable.
01:58 - Spray a penetrating catalyst onto the exhaust hardware.
02:17 - Loosen & remove relative hardware underneath the car.
02:46 - Loosen & remove the manifold to mid-pipe hardware.
03:17 - Remove the mid-pipe & the passenger side upstream o2 sensor.
03:51 - Remove the driveshaft.
04:34 - Remove the inspection cover, dislodge harnesses, & disconnect electrical connectors.
05:03 - Disconnect the clutch line & remove the output shaft speed sensor.
05:57 - Drain the fluid (optional).
06:17 - Remove the starter.
06:42 - Support the transmission & remove the crossmember.
06:51 - Remove the shifter assembly from the transmission.
07:13 - Remove the heat shields (optional).
07:20 - Loosen & remove the transmission to engine block hardware.
07:51 - Remove the transmission from the car.
08:20 - Remove the pressure plate, clutch disc, & flywheel.
09:47 - Remove the pilot bearing (optional).
10:07 - Remove the crankshaft sensor ring & separator plate.
10:21 - Final thoughts & outro.

#lmr #mustang #transmission

Use of this video is subject to the terms as set forth in our LMR Install Video Disclaimer | https://lmr.com/page/lmr-install-vide...