Bump Steer Adjustable Outer Tie Rod Ends for Porsche 996, 997, 991, Boxster & Cayman Elephant Racing

Are you looking to correct for bump steer the right way on your '99- '19 Porsche 996, 997, 991 or '97 and Up Boxster or Cayman? If so then Elephant Racings Bump Steer Adjustable Outer Tie Rod ends are exactly what you need.

Bump steer is a change in toe due to the vertical displacement of the wheel, like what happens when going over a bump. The change in toe causes the car to turn, and the driver needs to correct for this to maintain a steady trajectory, also bump steer becomes more profound with a lowered ride height. Elephant Racing bump-steer adjustable tie rods have provision to adjust bump steer, minimizing bump steer and reducing the need for driver corrections, making it easier to go fast.

Elephant Racing bump-steer adjustable tie rods are made from solid aluminum and anodized for protection, also fully weather-sealed to keep out contaminants and extend the product's life. They feature adjustable spacers and have an angled head to partly compensate for the changed angle of the tie rod when the car is lowered. This keeps the stud near the center of the range of motion, preventing bottoming out.

Bump steer is easily adjusted by spacing down the tie rod at the wheel side of the tie rod assembly, adjustment is made by placing spacers above or below the steering knuckle on the wheel carrier. For minimum correction place all flat spacers above the steering knuckle, for Maximum correction place all flat spacers below the steering knuckle, and intermediate bump steer values are achieved by splitting the spacer placement, some above and some below the steering knuckle.

Available for '99-'19 Porsche 996, 997, and 991’s also '97 and up Porsche Boxster and Caymans.

https://www.elephantracing.com/porsch...