How to build the wooden model ship "San Felipe". Model ship building guide" n° 34.

🔔 subscribe for more like this:    / @curtis_wooden_shipyard  

👉 See more?    • How to build the model ship "San Feli...  

⚓How to build the model ship "San Felipe" n° 34 || Adding the channels/chain wales to the hull.

First of all, the position of the channels must be fixed on het hull. Afterwards, the channels are filed so that they properly follow the curve of the hull. For the smallest channel, I provide extra supports (as it will be placed on the small wale). Two holes are drilled. Small nails are fixed in these, after which their heads are cut off. Afterwards, the exact position on the fuselage is fixed. Again, we drill two holes. The whole is glued with contact glue.

#shipbuilding, #modelkit, #scalemodels, #modelbuilding, #shipmodel, #shipmodeling, #scalemodel, #modelmaking, #DIY, #tutorial

@occre
   / occre  
https://occre.com/products/barco-san-...

@occre
   / occre  
https://occre.com/products/barco-san-...

00:00 Start
00:09 Overview of the channels to be fixed
00:12 Positioning of the channels on the hull
00:40 filing of the channels
01:17 Checking if it fits
01:26 Adding two additional fixation points to the smallest channel
02:20 Positioning of the small channel to the hull
03:37 Gluing the small channel to the hull
04:16 Adding the side supports
04:56 Overview of the attached channels
05:24 End screens