How to Replace Serpentine Belt & Tensioner 2007-2011 Honda Civic

Buy Now!
New Serpentine Drive Belt Component Kit from 1AAuto.com http://1aau.to/ia/GAEEK00296

This video shows you how to install a new tensioner pulley and serpentine belt on your 2007-2011 Honda Civic. That squealing noise coming from your vehicle’s engine compartment could be a slipping belt, or it could be a bad pulley bearing, or both. A bad pulley could eventually damage the belt, which could create even further damage. Replace both at the same time with this convenient kit!

This repair was done on a 2007 Honda Civic EX 1.8L and the process should be similar on the following vehicles:
2006 Honda Civic
2007 Honda Civic
2008 Honda Civic
2009 Honda Civic
2010 Honda Civic
2011 Honda Civic

Tools you will need:
• Phillips Bit in a Ratchet
• 10mm Socket http://1aau.to/oJq/1AXAA00017
• 12mm Socket http://1aau.to/oP4/1AXAA00015
• 19mm Socket http://1aau.to/otw/1AXAA00043
• Trim Tool Set http://1aau.to/op2/1AXXX00006
• 15/16 Inch Socket
• 1/2 Inch Breaker Bar http://1aau.to/oeH/1AXAA00078
• Torque Wrench http://1aau.to/oz3/1AXAA00044
• Safety Glasses
• 8mm Allen Wrench
• Drain Pan

Subscribe:    / @trq  

Check out our playlist:
Honda Civic 2006-2011 8th Generation:    • Honda Civic 2006-2011 8th Generation  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.