Tyre Lubrication of Rotary Kiln | Best method | Graphite lub Bar Quality Parameter

Best method to apply Kiln Tyre Lubrication | Quality parameter of Lubrication Graphite Bar. The Best Method to Lubricate Kiln Tires |

Mr. JK Singh (Whattapp: 8106351454) has experience in project engineering, designing, operation & maintenance.

The Kiln Shell rotates independently inside the Kiln Tire. The Kiln Shell is aligned using a set of Wear Pad or Filler Bars or Chair Pad , which maintain the alignment of the kiln from pier to pier. Kilns vary at speeds from less than 1 to 4+ revolutions per minute. Variables of specific products (cement, lime, minerals and chemicals) and desired production amount result in changes in temperature and weight of the kiln. These variables create wear and tear.

Quality parameter of Lubrication Bar:

1. 100% Lubricant Composition: No Adulteration. No waxes. No waste.
2. Extend Kiln Life by 50%: Protects the kiln and stop blocks while eliminating breakage of filler bar welds.
3. Save Money on Maintenance: Reduces the wear that results from scoring of the inside bore of riding ring.
4. No Flame Ups: Auto-ignition point 538°C melting point .
5. Highest Quality for Fewer Applications: Highest graphite content (~30 to 40%) of any other tire bore lubricant.
6. Environmentally Safe: Lubrication Bar must completely evaporates leaving no sticky residue, no waste and no harmful chemicals traces.
7. Quick & safe easy to Apply.

#Kilntyrelubrication #Rotarykiln #Kiln #Cementplant #Graphitebar