Rally Raid Level 1 Suspension on the Honda CRF300L Rally - Front and Rear

I installed the Rally Raid Level 1 shocks, front and back, on my CRF300L Rally. In this video I talk about the installation process, tools needed, my overall impressions of the suspension, and whether I think it's a necessary upgrade.

Install video for front forks recommended by Rally Raid:
   • Rally Raid Level I Front fork Kit Ins...  

Install video for rear shock recommended by Rally Raid:
   • RR Rally L2Shock Install V1  

Below is a link to a syringe similar to the one I used to fill the fork oil in the left fork through the teeny hole. This one from amazon is 100ml, so it should go faster with this than with the 30ml syringe I used. The left fork takes 500ml of fork oil total. The right fork takes 400ml of oil, but on the right fork it can just be poured in easily - it's not going in through a small hole. I didn't mention it in the video, but the fork kit from Rally Raid does come with one liter of fork oil, which is plenty.
https://www.amazon.com/Carejoy-Indutr...

These are the cheap snap ring pliers I bought from Walmart:
https://www.walmart.com/ip/Hyper-Toug...

0:00 Intro
0:25 Rally Raid level 1
1:02 Before and after seat height
4:44 Why I didn't do a full install video
5:36 A few install tips
10:28 Incompatibility with other mods
13:30 My overall thoughts on the new suspension