Configuring VLT Micro Drive FC51 for Two wire start/stop with Multi-setup (Auto/manual) || DIGICON

Configuring VLT Micro Drive FC51 for Two wire start/stop with Multi-setup (Auto/manual) system || Digicon Automation

Auto Mode: Reference from PLC (Programmable Logic Controller)
Manual Mode: Reference from POT (Potentiometer)

Parameter No. Parameter name Set-up 1 (Auto) Set-up 2 (Manual)
0-10 Active Set-up [ 9 ] Multi Set-up [ 9 ] Multi Set-up
0-11 Edit Set-up [ 1 ] Set-up 1 [ 2 ] Set-up 2
0-12 Link setups [ 20 ] Linked [ 20 ] Linked
1-20 Motor Power As per motor data As per motor data
1-22 Motor Voltage As per motor data As per motor data
1-23 Motor Frequency As per motor data As per motor data
1-24 Motor Current As per motor data As per motor data
1-25 Motor Nominal Speed As per motor data As per motor data
3-15 Reference Resource 1 [ 2 ] Analog Input 60 [ 1 ] Analog Input 53
3-16 Reference Resource 2 [ 0 ] No function [ 0 ] No function
3-17 Reference Resource 3 [ 0 ] No function [ 0 ] No function
3-41 Ramp 1 Up Time As per Requirement As per Requirement
3-42 Ramp 1 Down Time As per Requirement As per Requirement
4-10 Motor Speed Direction [ 0 ] Clockwise [ 0 ] Clockwise
4-14 Motor Speed High Limit 50Hz 50Hz
4-16 Torque Limit Motor Mode 150% 150%
4-17 Torque Limit Generator Mode 100% 100%
5-10 Terminal 18 Digital Input [ 8 ] Start [ 8 ] Start
5-11 Terminal 19 Digital Input [ 0 ] No function [ 0 ] No function
5-12 Terminal 27 Digital Input [ 0 ] No function [ 0 ] No function
5-13 Terminal 29 Digital Input [ 0 ] No function [ 0 ] No function
5-15 Terminal 33 Digital Input [ 23 ] Set-up select bit [ 23 ] Set-up select bit
5-40 Function Relay (Relay 1) [ 5 ] Running [ 5 ] Running
6-10 Terminal 53 Low Voltage - 0.00 V
6-11 Terminal 53 High Voltage - 10.00 V
6-19 Terminal 53 mode - [ 0 ] Voltage mode
6-22 Terminal 60 Low Current 4.00 mA -
6-23 Terminal 60 High Current 20.00 mA -