Airsoft Version 2 Gearbox Upgrade, Part Two A

Part 2 will be broken down into two parts, this video I show how we install the Gate Aster Mosfet unit and trigger install. The second part to this will be the Calibration and Programming.

Improvement at the core of your AEG

Be sure to follow Gate on their Facebook,
https://m.facebook.com/gatee/posts/?r...

There is three different set of sensors that we need to pay attention to; Three on the front and Three on the back. On the front side we have, one sensor that controls the trigger, a set of Two sensons for the Sector Gear (this is what tells your Mosfet when a cycle has been completed). On the back side there is a set of three; each one controls the preset firing selections (for example SAFE-SEMI-AUTO).

As far as installing the Aster physically, it was not very difficult, however, some Version 2 gearbox might not be compatible (The Matrix G2 version, for example, the Aster will not fit)
Before buying a specific gearbox or if you have a current gearbox you want to do this upgrade, Make sure to open it and to check your gearbox layout. There is another Gate Mosfet out there called the Titan, those might work in some gearboxes that the Aster would not, I did not buy the Titan so I cannot say for sure.
Keep in mind you are not limited to just these Mosfets by Gate, there are plenty of choices on the market.

As a disclaimer, I clam no responsibility for any of the task repeated. Do these at your own risk.

Thank you for watching, please like, subscribe and comment.