2 KONE MonoSpace 500 (EcoDisc) Lifts near Solothurn, Switzerland

Timestamps:
0:00 intro
0:18 normal ride
1:54 motor room
5:04 car top / lift shaft

These two KONE MonoSpace lifts were built in 2016 and are installed in a residential building. Interestingly, they are not combined into a group, although they both serve all floors.
Although the EcoDisc is a very good MRL concept, these lifts have some unsatisfying points in my opinion. The speed of the lifts is definitely too slow for around 35 meters of travel (15 floors). Even though the leveling is excellent, the acceleration/deceleration should be faster. The build quality of the lift cars seems mediocre, the walls are rather flimsy. Last but not least, I was surprised to find that the two EcoDiscs have extremely low power ratings. For Schindler 3300 lifts with comparable capacity, motors with ca 4kw and 7kw respectively would have been used.
These lifts are a replacement for two old Gebauer lifts from 1971. For those interested in the construction and logic of Gebauer lifts, here is a very in-depth video of a Gebauer freight lift:    • ORIGINAL 1975 GEBAUER Freight Lift in...  

Manufacturer: KONE, 2016
Capacity: 12 persons / 900 kg (right), 4 persons / 400 kg (left)
Type: Traction, 2:1 roping
Floors: 15: -1, 0, 1 - 13
Fixtures: KONE KSS 280
Speed: 1 m/s
Logic: KONE LCE
Motor: EcoDisc, 5.7kw (right) / 2.8kw (left)

DISCLAIMER: DO NOT attempt to copy anything shown in the video without having the proper knowledge of how to do so. Lift shafts and machine rooms can be very dangerous places and are not meant for the general public.